Web Procedure – Enable or Disable Locate LED In the web interface, click System Monitoring –> Indicators. In the Actions list box, click Name: Locate. To illuminate the Locator LED, select the radio button adjacent to /SYS/LOCATE, and then click Set LED to Fast Blink. To disable the Locator LED, select the radio button adjacent …
How to Locate Oracle Sun Server Using Locator LED Read More »
To start a Sun fire T5120/T5220/T5140/T5240/blades first login with login password Login: root Password: changeme Then power on the server. -> start /SYS Are you sure you want to start /SYS (y/n)? y Starting /SYS Then connect to the consloe -> start /SP/console Are you sure you want to start /SP/console (y/n)? y To start …
Sun Fire Mx00 initial configuration login with admin, if admin doesn’t work use default which will wait till the key is turned. login: admin Cerate user jsmith and privileges XSCF> adduser -u 921 jsmith XSCF> password jsmith XSCF> setprivileges jsmith platadm fieldeng useradm mode auditadm XSCF> exit login as jsmith Get all hardware configs XSCF> …
Sun fire M5xxx XSCF initial boot process configuration Read More »
Contents 1 NetBackup Oracle VM for SPARC configuration 1.1 Primary domain config 1.2 Primary network config 1.2.1 BKM ldom config 1.2.2 Configure CD-Rom for OS install 1.2.3 Configure DCX/FC switch zoning for SAN boot Disk 1.3 Configure PCI bus / Ethernet & FC slots 1.3.1 Remove PCI bus from the primary domain 1.3.1.1 Turn on …
Oracle T5-4 OVM for SPARC (ldom) – Root Domain Configuration Read More »
Contents 1 Oracle VM for SPARC configuration for T5-2 1.1 Primary domain config 1.2 Primary network config 1.2.1 T5-2 ldom config 1.2.2 Configure CD-Rom for OS install 1.2.3 Configure DCX/FC switch zoning for SAN boot Disk 1.3 Configure PCI bus / Ethernet & FC slots 1.4 Save the ldom config / configure ldom auto save …
Oracle T5-2 OVM for SPARC (ldom) – Root Domain Configuration Read More »
Recovering TX000 ALOM Passwords Procedure as below for reseting the T2000 ALOM password due to no scadm command available for the sun4v architecture in Solaris 10. Recovering TX000 ALOM Passwords For security reasons, this procedure is available only while accessing the system directly through the serial port. The procedure resets all ALOM NVRAM settings. To …